Application of multivariate statistical methods to indicate the origin and geochemical behavior of potentially hazardous elements in sediment around the Sarcheshmeh copper mine,SE Iran

Multivariate statistical techniques, i.e., correlation coefficient analysis, principal components analysis (PCA), and hierarchical cluster analysis (CA), were applied to the total and water-soluble concentrations of potentially hazardous metals in sediments associated with the Sarcheshmeh mine, one of the largest Oligo-Miocene porphyry copper deposits in the world. The samples were analyzed for hazardous metal concentration levels by inductively coupled plasma mass spectrometry method. Results indicate that the contaminant metals As, Cd, Cu, Mo, S, Sb, Sn, Se, Pb, and Zn were positively correlated with the total concentrations. These hazardous metals also have strong association in the PCA and CA results. Different anthropic versus natural sources of contaminant metals were distinguished by using CA method. Water-soluble fraction of hazardous metals showed that the hydro-geochemical behavior of these metals in sediments is different considerably. Elements such as Cd, Co, Cr, Cu, Fe, Mn, Ni, S, and Zn are readily water soluble from contaminated samples, especially from evaporative mineral phases, while the release of As, Mo, Sb, and Pb into the water is limited by adsorption processes. Results obtained from the application of multivariate techniques on the water-soluble fraction data set show that the hazardous metals are categorized into three groups including (1) Ni, S, Co, Cu, Cr, and Fe; (2) Se, Mn, Cd, and Zn; and (3) Sb, As, Mo, and Sn. This classification describes the hydro-geochemical behavior of hazardous metals in water–sediment environments of the Sarcheshmeh porphyry copper mine and can be used as a basis in remedial and treatment strategies.     

Strong ground motion record selection for the reliable prediction of the mean seismic collapse capacity of a structure group

How to select a limited number of strong ground motion records (SGMRs) is an important challenge for the seismic collapse capacity assessment of structures. The collapse capacity is considered as the ground motion intensity measure corresponding to the drift‐related dynamic instability in the structural system. The goal of this paper is to select, from a general set of SGMRs, a small number of subsets such that each can be used for the reliable prediction of the mean collapse capacity of a particular group of structures, i.e. of single degree‐of‐freedom systems with a typical behaviour range. In order to achieve this goal, multivariate statistical analysis is first applied, to determine what degree of similarity exists between each selected small subset and the general set of SGMRs. Principal Component analysis is applied to identify the best way to group structures, resulting in a minimum number of SGMRs in a proposed subset. The structures were classified into six groups, and for each group a subset of eight SGMRs has been proposed. The methodology has been validated by analysing a first‐mode‐dominated three‐storey‐reinforced concrete structure by means of the proposed subsets, as well as the general set of SGMRs. The results of this analysis show that the mean seismic collapse capacity can be predicted by the proposed subsets with less dispersion than by the recently developed improved approach, which is based on scaling the response spectra of the records to match the conditional mean spectrum. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of gravity anomaly at sea level from inversion of satellite gravity gradiometric data

Gravity gradients can be used to determine the local gravity field of the Earth. This paper investigates downward continuation of all elements of the disturbing gravitational tensor at satellite level using the second-order partial derivatives of the extended Stokes formula in the local-north oriented frame to determine the gravity anomaly at sea level. It considers the inversion of each gradient separately as well as their joint inversion. Numerical studies show that the gradients T_zz, T_xx, T_yy and T_xz have similar capability of being continued downward to sea level in the presence of white noise, while the gradient T_yz is considerably worse than the others. The bias-corrected joint inversion process shows the possibility of recovering the gravity anomaly with 1 mGal accuracy. Variance component estimation is also tested to update the observation weights in the joint inversion.     

Evaluation of public participation in reconstruction of Bam,Iran, after the 2003 earthquake

In the midst of the ever-increasing natural and human-induced disasters, where many of the preparedness and mitigation measures show inefficiencies, there is narrow margin for decision-makers to make mistakes by misallocating budgets, designing infeasible reconstruction plans, and in other terms, making decisions not in line with the public preferences. In particular, public participation in post-disaster measures seems undoubtedly necessary to reduce the possible economic, social, political, and cultural conflicts around the stressful community after a major disaster. This paper aims at evaluating the role of public participation in increasing the reconstruction phase efficiency through a case study of the reconstruction process in Bam, a southeastern Iranian city, after the 2003 earthquake. It is attempted to identify the major motivators of the public participation through a combination of quantitative and qualitative studies. Statistical data are generated through a set of questionnaires being filled by a number of 200 randomly selected survivors. The numerical results were then discussed through the Focus Group technique sessions to determine the main contributors to the public participation. It is later found that the answers are found among the performance of the reconstruction authorities, financial policies, emotional resiliency of the survivors, public information mechanisms, public satisfaction, the pace of reconstruction, and temporary housing policies.     

Hydrochemistry, mineralogy and chemical fractionation of mine and processing wastes associated with porphyry copper mines: A case study from the Sarcheshmeh mine, SE Iran

The Sarcheshmeh is one of the largest Oligo-Miocene porphyry Cu deposits in the world. Comparative hydrochemical, mineralogical and chemical fractionation associated with mining efflorescence salts and processing wastes of this mine are discussed. Hydrochemical results showed that rock waste dumps, reject wastes and old impoundments of tailings are the main sources of acid mine drainage waters (AMD) that contain potentially toxic metals such as Cd, Co, Cu, Mn, Ni and Zn as well as Al. Episodic fluxes of highly contaminated acidic waters were produced in a tailings dam over a short period of time. Secondary soluble minerals provide important controls on the quality of AMD produced, especially in old, dry tailings impoundments. Secondary sulfate minerals such as gypsum, magnesiocopiapite, hydronium jarosite, kornelite and coquimbite were found in rock waste drainages and in old weathered reject wastes. Highly soluble secondary minerals such as gypsum, eriochalcite, and bonattite are also observed in an evaporative layer on old tailings impoundments. Chemical fractionation patterns of potentially toxic elements showed that the geochemical behavior of metals is primarily controlled by the mineralogical composition of waste samples. Elements such as Co, Cr, Cu, Mn, Ni and Zn are readily released into the water soluble fraction from efflorescence salts associated with rock waste drainages, as well as from the evaporative layer of old tailings. Potentially toxic elements, such as As, Mo and Pb, are principally adsorbed or co-precipitated with amorphous and crystalline Fe oxides, but they may also be associated with oxidizing, primary sulfides and residual fractions. Following the development of the dammed tailings pond, the secondary minerals were dissolved, producing acidic waters contaminated by Al (154 mg L⁻¹), Cu (150 mg L⁻¹), Cd (0.31 m gL⁻¹), Co (2.13 mg L⁻¹), Mn (73.7 mg L⁻¹), Ni (1.74 mg L⁻¹), Zn (20.3 mg L⁻¹) and Cl (1690 mg L⁻¹). Therefore, the potential use of recycled water from the Sarcheshmenh dammed tailings pond is diminished by the presence of corrosive ions like Cl⁻ in highly acidic fluids that promote corrosion of pipes and pumps in the water recycling system.     

Environmental geochemistry of toxic heavy metals in soils around Sarcheshmeh porphyry copper mine smelter plant,Rafsanjan, Kerman,Iran

The Sarcheshmeh copper mine smelter plant is one of the biggest copper producers in Iran. Long-time operation of about 25 years of the smelter plant causes release of potentially toxic heavy metals into the environment. In this paper, geochemical distribution of toxic heavy metals in 28 soil samples was evaluated around the Sarcheshmeh smelter plant. Soils developed over the nonmineralized and uncontaminated areas have an average background concentration of 41.25 mg kg⁻¹ Cu, 26.6 mg kg⁻¹ As, 12.7 mg kg⁻¹ Pb, 0.9 mg kg⁻¹ Sb, 1.9 mg kg⁻¹ Mo, 1.7 mg kg⁻¹ Sn, 0.2 mg kg⁻¹ Cd, 0.15 mg kg⁻¹ Bi, 235 mg kg⁻¹ S and 73.4 mg kg⁻¹ Zn, respectively. As a result of smelting process, the upper soil layers (0–5 cm) were polluted by Cu (>1,397 mg kg⁻¹), Cd (>3.42 mg kg⁻¹), S (>821 mg kg⁻¹), Mo (>10.3 mg kg⁻¹), Sb (>11.7 mg kg⁻¹), As (>120.6 mg kg⁻¹), Pb (>83.8 mg kg⁻¹), Zn (>214.9 mg kg⁻¹), and Sn (>3.7 mg kg⁻¹), respectively. These values are much higher than the normal concentration of the elements in the uncontaminated soil layers. The elemental values decrease with distance travelled away of the smelter plant, especially at minimum wind direction. Furthermore, high contaminated values of Cu (8,430 mg kg⁻¹), As (500 mg kg⁻¹), Pb (331 mg kg⁻¹), Mo (61 mg kg⁻¹), Sb (56.2 mg kg⁻¹), Zn (664 mg kg⁻¹), Cd (17.2 mg kg⁻¹), Bi (13.4 mg kg⁻¹), and S (3,780 mg kg⁻¹) were observed in the upper soil layers close to the smelting waste dumps. Sequential extraction analysis shows that about 270 mg kg⁻¹ Cu, 28 mg kg⁻¹ Pb, 50.33 mg kg⁻¹ Zn, and 47.84 mg kg⁻¹ As were adsorbed by Fe and Mn oxides. The carbonate phases include 151 mg kg⁻¹ Cu, 28 mg kg⁻¹ Pb, 25 mg kg⁻¹ Zn, and 32.99 mg kg⁻¹ As. Organic matter adsorbed 314.6 mg kg⁻¹ Cu and 29.18 mg kg⁻¹ Zn.     

Composition, porosity, and reservoir potential of the Middle Jurassic Kashafrud Formation, northeast Iran

In the Kopet-Dagh Basin of Iran, deep-sea sandstones and shales of the Middle Jurassic Kashafrud Formation are disconformably overlain by hydrocarbon-bearing carbonates of Upper Jurassic and Cretaceous age. To explore the reservoir potential of the sandstones, we studied their burial history using more than 500 thin sections, supplemented by heavy mineral analysis, microprobe analysis, porosity and permeability determination, and vitrinite reflectance.The sandstones are arkosic and lithic arenites, rich in sedimentary and volcanic rock fragments. Quartz overgrowths and pore-filling carbonate cements (calcite, dolomite, siderite and ankerite) occluded most of the porosity during early to deep burial, assisted by early compaction that improved packing and fractured quartz grains. Iron oxides are prominent as alteration products of framework grains, probably reflecting source-area weathering prior to deposition, and locally as pore fills. Minor cements include pore-filling clays, pyrite, authigenic albite and K-feldspar, and barite. Existing porosity is secondary, resulting largely from dissolution of feldspars, micas, and rock fragments, with some fracture porosity. Porosity and permeability of six samples averages 3.2% and 0.0023 mD, respectively, and 150 thin-section point counts averaged 2.7% porosity. Reflectance of vitrinite in eight sandstone samples yielded values of 0.64-0.83%, in the early mature to mature stage of hydrocarbon generation, within the oil window.Kashafrud Formation petrographic trends were compared with trends from first-cycle basins elsewhere in the world. Inferred burial conditions accord with the maturation data, suggesting only a moderate thermal regime during burial. Some fractures, iron oxide cements, and dissolution may reflect Cenozoic tectonism and uplift that created the Kopet-Dagh Mountains. The low porosity and permeability levels of Kashafrud Formation sandstones suggest only a modest reservoir potential. For such tight sandstones, fractures may enhance the reservoir potential.     

On the planar motion in the full two-body problem with inertial symmetry

Relative motion of binary asteroids, modeled as the full two-body planar problem, is studied, taking into account the shape and mass distribution of the bodies. Using the Lagrangian approach, the equations governing the motion are derived. The resulting system of four equations is nonlinear and coupled. These equations are solved numerically. In the particular case where the bodies have inertial symmetry, these equations can be reduced to a single equation, with small nonlinearity. The method of multiple scales is used to obtain a first-order solution for the reduced nonlinear equation. The solution is shown to be sufficient when compared with the numerical solution. Numerical results are provided for different example cases, including truncated-cone-shaped and peanut-shaped bodies.     

A new integration scheme for application to seismic hybrid simulation

Hybrid simulation is a powerful test method for evaluating the seismic performance of structural systems. This method makes it feasible that only critical components of a structure be experimentally tested. This paper presents a newly proposed integration algorithm for seismic hybrid simulation which is aimed to extend its capabilities to a wide range of systems where existing methods encounter some limitations. In the proposed method, which is termed the variable time step (VTS) integration method, an implicit scheme is employed for hybrid simulation by eliminating the iterative phase on experimental element, the phase which is necessary in regular implicit applications. In order to study the effectiveness of the VTS method, a series of numerical investigations are conducted which show the successfulness of the VTS method in obtaining accurate, stable and converged responses. Then, in a comparative approach, the improved accuracy of the VTS method over commonly used integration methods is demonstrated. The stability of the VTS method is also studied and the results show that it provides conditional stability; however, its stability limit is well beyond the accuracy limit. The effect of time delay on the VTS method results is also investigated and it is shown that the VTS method is quite successful in handling this experimental error.     

Salinisation de l’aquifère libre de la Chaouia côtière (Azemmour-Tnine Chtouka), Maroc

L’aquifère libre de la Chaouia côtière constitue un exemple des aquifères les plus exploités au Maroc. Ce travail est consacré à l’étude des processus de la salinisation des eaux souterraines par l’analyse physico-chimique de 39 puits répartis dans la zone. Deux types de faciès ont été révélés, l’un est chloruré-sodique dans la frange côtière ; l’autre faciès est de type chloruré bicarbonaté-calcique caractérisant les eaux exploitées dans les calcaires marneux du Crétacé. L’influence marine (aérosols et intrusion marine), la dissolution/précipitation de la roche aquifère et l’infiltration des eaux d’irrigation, sont parmi les causes de l’augmentation de la salinité des eaux souterraines, en plus de l’exploitation excessive de l’eau souterraine.